GQ40C型鋼筋切斷機

GQ40C型鋼筋切斷機主要技術參數（鋼筋抗拉強度σb≤500Mpa以下）

GQ40 Reinforcing Bar Cutting Machine technical parameters (reinforced ultimate tensile strength σb≤500Mpa below)

品牌型號  ：  GQ40C 

GQ40C鋼筋切斷機，適用于建筑工程上各種鋼筋混凝土中普通碳素鋼及熱軋圓鋼和螺紋鋼的切斷，為您的施工降低大量的人力，大幅提高功效。該機具有以下特點。

1、  體積小、結構緊湊、噪音低，沖程大。

2、  潤滑性能好：采用箱式封閉結構，齒輪飛濺潤滑（油面應不高于油標刻線，使機器始終處于適當的潤滑狀態）

3、  功率損耗少：因潤滑條件的改善，齒輪軸端采用滾動軸承，阻力小，與同類切斷機相比同負載時功率損耗可降低三分之一。

   移動方便：四輪著地，機動靈活，穩定可靠，維修方便

 GQ40C Reinforcing Bar Cutting Machine, is usedto cut off all kinds of normal carbon steel, The cross-section of the steel bar end cut by this machine is very parallel andlevel, which can be directly for threading working. It reduce the worker numberand improve the efficiency significantly. This machine has the

followingcharacteristics.

1. Small volume, compactstructure, low noise, large stroke.

2. Lubricating performance: adopt the box-typeclosed structure, gear splash lubrication (oil surface should notbe h    igher than standard oil

groove, so that the machine is always in a properlubrication state)

3. Less power loss: due to the improvement oflubrication condition, gear shaft end uses rolling bearings, theresist    ance is small, compared

with the same kind of cutting machine, the power loss can bereduced

by 1/3.

  Convenient movement: the four wheelson the ground, flexible, stable

 and reliable, convenient maintenance.